Boat Sheds
Posted: January 15th, 2020, 10:56 pm
We have all the materials and good weather this weekend to start replacing the rotten wooden sides with Box profile plastic coated sheets, these have been cut to size. The work entails removing sections of gates, taking off the existing panels and cutting off 35mm from the existing posts using a circular saw and installing horizontal bearers between each post to support the roof properly and attach the steel sheets. Then replacing the gate sections.If you have a chop saw, portable circular saw for the post width reduction, please bring it along, the bearers will be glued and screwed to the posts. Battery operated drills, would help, butane torches to help with the gate rusty bolts. Hope you can help.....